splices

英 [ˈsplaɪsɪz]

美 [ˈsplaɪsɪz]

v.  绞接，捻接(两段绳子); 胶接，粘接(胶片、磁带等)
splice的第三人称单数

柯林斯词典

• VERB 绞接(绳子);粘接(胶片、磁带等)
  If yousplicetwo pieces of rope, film, or tape together, you join them neatly at the ends so that they make one continuous piece.
  1. He taught me to edit and splice film...
     他教我剪辑和粘接胶片。
  2. The film will be spliced with footage of Cypress Hill to be filmed in America.
     这部电影要和将在美国拍摄的柏树山乐队的音乐片段粘接在一起。
• V-PASSIVE 结婚
  When two peopleget spliced, they get married.
  1. An old friend of mine, newly spliced, recently invited me to dinner in his new marital home.
     我的一位刚结婚不久的老朋友最近邀请我到他的婚房去吃晚饭。

双语例句

• Quasi-Static Calculation Method for Dynamic Bending Stress of Rail Splices for Frozen Joint of Jointless Track
  冻结接头鱼尾板动弯应力准静态计算方法
• It won't work, though, if your kernel is customized and built locally, because Uptrack Manager cannot compare your kernel to a known, published operating system to generate splices.
  但是，如果内核是经过定制、在本地构建的，它就无效了，因为UptrackManager无法针对公开发布的操作系统检查内核并生成拼接。
• Cracks have been found in the flange and web splices at groove welds in at least four bridges.
  至少在四座桥梁的翼缘板和腹板拼接坡口焊缝中发现了裂纹。
• Where field splicing is unavoidable, splices should be vulcanized.
  若现场拼接不可避免，宜将拼接物硫化。
• Loss analysis of the single mode elliptic core fiber fused splices
  单模椭圆芯光纤熔接接头损耗的计算
• Due to the fact that both in transportation as well as in handling, conveyor belt are therefore made up by bonding together a number of conveyor belt sections through vulcanization. Each conveyor belt has at least one and generally a number of splices.
  因为受到装载与运输的限制，输送带是由许多部分通过硫化处理连接而成的，每条输送带至少有一个或多个接头。
• Though analyzing the butt end and the length of splices, obtain the stress in butter decreased with the increasing of their length.
  在对接头的对接面和其长度的分析中，发现橡胶内的应力随着这两者长度的增加而降低。
• Though analyzing the different type, maximum value in 213-pattern is less than the other two patterns. So use the 213-pattern can improve the load capacity of the splices.
  在对不同的搭接方式的分析中，213型接头其应力的最大值小于其他的搭接方式，采用213型的排列方式将有助于提高接头的承载能力。
• Loss Anlysis of Single-mode Fiber Melting-splices
  熔接单模光纤接头的损耗
• Though analyzing the built models, obtain the result that the gap between the cords in splices must have enough width in order to improve the force condition in butter.
  通过对所建模型的分析，得出了钢丝绳间要有足够的宽度，以改善橡胶的受力情况。