shrinkages
英
美
(shrinkage 的复数) n. 收缩, 收缩量, 减低
[化] 起皱; 收缩; 收缩量
shrinkage的复数
双语例句
- Using simulation experiment, shrinkages of injection molding parts with different thickness are studied. Simulation experiments are performed with same parameter of process condition and fixed gate dimension and position.
采用模拟实验的方法，在相同注射工艺条件下，保持浇口尺寸和位置不变，对不同厚度制品的成型收缩率进行模拟实验研究，绘制了模拟实验曲线。 - On the one hand, casting shrinkages at different positions of the blade are considered as nonlinear thermo-mechanical casting deformations that are calculated with accuracy by finite element analysis.
一方面，基于叶片收缩变形位移场的有限元仿真结果，更为准确地计算铸件不同部位的收缩率； - The shrinkages of green bodies in X, Y, Z directions were measured. The results show that under the same pressure, there is no difference of shrinkage in X and Y directions, and does not change with the height.
结果表明，同一压力下，坯体X向和Y向收缩率一致，并且不同高度处的X、Y向收缩率无明显差异。 - The shrinkages of the different composition zinc matrix alloys were measured by the self made linear shrinkage measurer.
对模具用不同配比的锌基合金进行了收缩率的测定。 - The design of a vertical die casting machine rotor is most important to improve the quality of the rotor, traditional rotor castings have many shrinkages such as dispersed organization, bad compaction degree, large blowholes.
电机转子立式压铸机压铸模具的设计制造是保证电机转子品质至关重要的环节，传统工艺生产的电机转子铸件存在着组织疏松、密实度差、气孔多而大等缺陷，影响着电机的各种态势性能； - During the solidification of ductile iron, the volume change can be separated into several stages: after molten iron poured, shrinkages occur along with the temperature descent;
球墨铸铁凝固过程中的体积变化可以分成如下几个阶段：浇注后，铁水随温度的下降，发生液态收缩； - Variation in Densities and Shrinkages of Chinese Fir Wood From Plantation
杉木人工林木材密度及干缩性变异规律 - The effects of carbonization temperature and time on shrinkages of PAN-CHF and PAN-ACHF, activation yield, specific surface area and adsorption capacity were investigated.
考察了炭化温度和炭化时间对PAN-CHF的收缩率、PAN-ACHF的收缩率、活化收率、比表面积和吸附性能的影响。 - When the magnesium alloys are welded by TIG or MIG, the metal in the seam will be oxidized acutely. Some defects such as cracks, voids and shrinkages appear.
当镁合金采用钨极氩弧焊、熔化极气体保护焊等焊接方法时，焊缝金属会剧烈氧化，产生气孔、裂纹等缺陷。 - Because 3D surface model contains huge number of triangles, a mesh simplification algorithm based on triangle edges shrinkages is presented in this paper to speed up the rendering in real time.
并对其生成的表面几何模型所包含三角面片数量巨大的问题，提出一种快速有效的三角形边收缩算法进行网格简化，提高了表面模型的绘制速度。