deformations

英 [ˌdiːfɔːˈmeɪʃənz]

美 [ˌdifɔrˈmeɪʃənz]

n.  损形; 变形; 畸形; 破相; 变丑; 残废
deformation的复数

柯林斯词典

• V-ERG （使）变形;（使）成畸形;损毁…的外形
  If somethingdeformsa person's body or something else, it causes it to have an unnatural shape. In technical English, you can also say that the second thingdeforms.
  1. Bad rheumatoid arthritis deforms limbs...
     严重的类风湿性关节炎会造成四肢变形。
  2. ...the ability of a metal to deform to a new shape without cracking.
     金属重新塑形而不断裂的能力

双语例句

• In this paper, the general phenomenon about subsidence and deformations of surface in subway construction is illustrated.
  阐述了城市地铁施工过程中，地表沉陷与变形的一般现象，探讨了地表沉降指数函数计算公式。
• The wing withstands vertical bending, chordwise bending and torsional deformations, and the rotor blade is considered to be capable of rigidly withstanding one order flap and lag motions.
  机翼承受垂向弯曲、弦向弯曲和扭转变形，螺旋桨旋翼的桨叶认为是刚性的并承受一阶挥舞和摆振。
• We discuss in more detail the application of the coupledmode formalism to scalar waveguide deformations.
  我们将详细讨论耦合模公式对标量波导畸变的应用。
• A boundary layer theory of shell buckling, which includes the effects of nonlinear prebuckling deformations, large.
  将壳体屈曲的边界层理论推广到复合材料层合剪切圆柱曲板受侧压作用的情况。
• Three dimensional reference deformations and strain facies are new advances in structural geology.
  三维参照变形和应变相是最近构造地质学领域中取得的重要进展。
• Dial gauges, gridding lines and digital camera were used to monitor quantitatively and write down qualitatively the deformations and displacements of the models.
  采用百分表、网格线和数码相机，对模型的变形和位移进行监测和记录。
• Then the door deformations in X and Y directions are analyzed with both theoretical and real gaps.
  分别对车门在理论间隙和实测间隙下的Y向变形、X向变形进行分析。
• Instability of asymmetric deformations of an incompressible thermo-hyperelastic spherical shell, subjected to internal pressure, is examined within the framework of finite elasticity.
  应用有限变形弹性理论分析了受内压作用的不可压热超弹性球壳发生非对称变形的不稳定性问题。
• The influence of inclined struts on the elastic properties under axial, bending, and shear deformations as well as the impact of axial deformation of horizontal struts were considered comprehensively.
  综合考虑了胞体中斜支柱的轴向、弯曲和剪切变形以及水平支柱的轴向变形的影响，利用最小势能原理得到了材料的弹性性能与各向异性比及相对密度的关系。
• Stress concentrations due to prestressing or other loads and to restraints or imposed deformations shall be considered.
  应考虑预加应力或其它荷载以及限制或施加变形引起的应力集中。